WOT Box Graphical User Interface and Instructions
The easiest method of WOT Box setup and troubleshooting is available here (to be used after installation).
N2MB Racing Recommended Soldering Technique
Please review these directions before starting the installation of any N2MB Racing products.
WOT Box Installation Instructions HARNESS REVISION AS OF 3/24/14If your harness is equipped with an ORANGE wire it will replace the 16 gauge BLACK wire of the RED / BLACK paired wires in the instructions below. Whenever the BLACK of the RED / BLACK pair is mentioned, use the ORANGE wire. The instructions will be updated to reflect this change shortly.
To summarize the functions of the wires:
RED - Ignition coil power IN
ORANGE - Ignition coil power OUT
BLACK - Ground
GREEN - Clutch wire input
BLUE - Throttle position sensor or accelerator pedal position sensor input
YELLOW - RPM input
Please choose your vehicle below.
Chevrolet
Dodge
Ford
Honda
Mazda
Mitsubishi
Nissan / Infinity
Pontiac
Scion
Subaru
Volkswagen / Audi
Other
|
|